GUTMANN CLARO EM 0401 Montageanleitung Seite 29

6. Make height adjust-
ment with threaded rod
and bushing if neces-
sary
To do this, cut the
threaded rod to length
and attach it to the
hanger bolts
threaded bushes.
7. Before hanging the
hood body (A), remove
the filter insert (E) by
removing the screw
connection (F).
A
E
ASSEMBLY INSTRUCTIONS
with
F
8. Hang the hood body on the hanger bolts
and fasten it in place with the washer and
nut.
9. Apply and affix the exhaust air hose,
ensuring that there are no kinks!
EN
29