Setting Menu Items; Displaying The Menu Screen; Setting Screen - JVC KW-V40BTE Bedienungsanleitung

SETTINGS SETTINGS

Setting menu items

Displaying the <Settings> menu screen
• When changing settings for <AV Input>, and
<Input> in <Navigation Input>, turn off the AV
source while [AV] is selected for <Display> on the
<HOME> screen. Other settings can be changed
when the AV source is turned on.
– For KW-V40BT : Make sure that "AV Off" is
selected as the rear source. (Page 24)
<Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 33)
• Flat (Initial)/Natural/Dynamic/Vocal Boost/Bass
Boost/Vibrant/User
<Loudness>
You can activate/deactivate loudness.
• On (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
• Off : Cancels.
< Crossover>
Adjust the crossover frequency. (Page 34)
<Volume Adjust >
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV .)
The volume level will automatically increase or
decrease when you change the source.
–15 to +6 (Initial: 00)
] to adjust.
<Speaker Select>
Select the size of the connected speaker.
• Standard (Initial)/Narrow/Middle/Wide
ENGLISH 39