Adjusting The Crossover Frequency; Adjustment For Video Playback - JVC KW-V40BTE Bedienungsanleitung

SETTINGS SETTINGS

Adjusting the crossover frequency

1
Display the <Crossover > screen.
On the <HOME> screen:
2
Select the item to adjust (1), then make
adjustments (2).
<HPF>
Adjusts the crossover for the
front ([Front]) or rear ([Rear])
speakers (high pass filter).
<LPF> Adjusts the crossover for the
subwoofer (low pass filter).
<SW Level> Adjusts the subwoofer level.
<Phase> Selects the phase for the
subwoofer.*
<Freq> Adjusts the crossover frequency.
* Not selectable when <Freq> is set to <Through>.
34

Adjustment for video playback

Adjusting the picture
You can adjust the picture quality.
1
Display the adjustment menu.
2
Select [ ] (dimmer on) or [
off).
3
Adjust the picture (–15 to +15).
<Brightness> Adjusts the brightness.
<Contrast> Adjusts the contrast.
<Black>
Adjusts the blackness.
<Color> Adjusts the color.
<Tint>* Adjusts the tint.
<Detail>
Adjusts the detail .
* Adjustable only when the incoming signal is NTSC.
] (dimmer