Concord ultimax Einbau- Und Bedienungsanleitung Seite 49

0255-01
5. Releasing the belt tensioner to remove the seat
5.1 5.2
0046-06 0043-08
1
3
First open the red belt clip. Releasing the belt tensioner on the
base unit when installed facing the
2
front:
Pull the grey lever on the belt
tensioner upwards with the thumb of
your left hand until you can push the
small grey button upwards (1) until
there is no tension on the belt.
Keep the grey button in this position
(2), and at the same time press the
lever down (3).