Duty Cycle; Error Codes And Flashing Sequences - HomeMatic HmIP-eTRV-B-UK Montage- Und Bedienungsanleitung

Troubleshooting
9.3

Duty cycle

The duty cycle is a legally regulated limit of the
transmission time of devices in the 868 MHz range. The
aim of this regulation is to safeguard the operation of all
devices working in the 868 MHz range.
In the 868 MHz frequency range we use, the maximum
transmission time of any device is 1% of an hour (i.e. 36
seconds in an hour). Devices must cease transmission
when they reach the 1% limit until this time restriction
comes to an end. Homematic IP devices are designed
and produced with 100% conformity to this regulation.
During normal operation, the duty cycle is not usually
reached. However, repeated and radio-intensive teach-
in processes mean that it may be reached in isolated
instances during start-up or initial installation of a system.
If the duty cycle is exceeded, this is indicated by one long
red lighting of the device LED (B), and may manifest itself
in the device temporarily working incorrectly. The device
starts working correctly again after a short period (max.
1 hour).
9.4

Error codes and flashing sequences

Flashing
code / LC
display
F1
70
Meaning
Valve drive
sluggish
Solution
Check whether the
valve pin is stuck.