Operation And Use; Connecting The Charger To The Power Supply; Connecting Your Devices; Disconnecting Your Device - Silvercrest SUCS A2 Bedienungs- Und Sicherheitshinweise

P Operation and use
Attention! Risk of overheating! Only
connect the product to your external devices which
do not require more than 6000 mA (= 6 A).
ATTENTION! If you use the product under max.
loading condition, the product may get hot. This is
normal because in this condition, the product uses
more power and therefore generates more heat.
Connecting the charger to the power
supply
Connect the power cable connector
power cable socket
Insert the power plug
mains socket. The requirements for the voltage can
be found in the "Technical data" section.
The operating LED
that the product is ready for use.

Connecting your devices

If your device to be charged is equipped with the
Qualcomm Quick Charge 3.0 technology, connect
the device's USB plug into USB Port A (Quick
Charge 3.0 )
For devices without Qualcomm Quick Charge 3.0
technology, connect devices USB plugs into one of
the other USB Ports B - E
voltage / charging current for the connected device
is set automatically.

Disconnecting your device

After charging is complete, simply unplug your
device's USB plug from the the product.
GB/IE 32
.
4
into an easily accessible
8
illuminates white to indicate
1
.
2
3
to the
6
. The optimum charging