Note Regarding The Inner Liner With Gas-Cooled Welding Torches; Connecting The Welding Torch - Fronius MTG 250d Bedienungsanleitung & Ersatzteilliste

Note regarding
the inner liner
with gas-cooled
If a gas-cooled welding torch is used with a plastic inner liner and bronze wire guide
welding torches
insert instead of a steel inner liner, the output data specified in the technical data
has to be reduced by 30 %.
To achieve the maximum output from a gas-cooled welding torch, replace the 40 mm
(1.575 in.) wire guide insert with the 300 mm (11.81 in.) wire guide insert as shown below.
1
1
Connecting the
1
1
welding torch
44
NOTE!
2
2
* LocalNet plug (Standard or Up/
Down welding torches)
** JobMaster plug (JobMaster welding
torches)