Package Contents; Description (Fig. A); Electrical Safety; English - DeWalt DW307 Bersetzt Von Den Originalanweisungen

Check for misalignment and seizure of moving
parts, breakage of parts and any other conditions
that may affect its operation. Have damaged
guards or other defective parts repaired or
replaced as instructed. Do not use the tool if the
switch is defective. Have the switch replaced by
an authorized D WALT repair agent.
E
20 Have your tool repaired by an authorized
D WALT repair agent
E
This Power Tool is in accordance with the relevant
safety regulations. To avoid danger, electric
appliances must only be repaired by qualified
technicians.
Additional safety rules for cutsaws
Plugging into the mains, switching on and off
• Always ensure that the saw is switched off before
plugging into the mains.
• After switching off, never attempt to stop the saw
blade with your fingers.
• Never put the saw down on a table or work bench
unless switched off. The saw blade will keep
running briefly after the tool has been switched off.
When sawing
• When using saw blades specially designed for
cutting wood remove all nails and metal objects
from the workpiece before starting work.
• Wherever possible, use clamps and vices to
fasten the workpiece securely.
• Do not attempt to saw extremely small workpieces.
• Do not bend too far forward. Make sure that you
always stand firmly, particularly on scaffolding
and ladders.
• Always hold the saw with both hands.
Checking and changing the saw blade
• Unplug the tool before cleaning or changing the
saw blade.
• Only use saw blades conforming to the
specifications contained in these operating
instructions.
• Only sharp saw blades with 1/2" shank in perfect
working condition should be used; cracked or
bent saw blades should be discarded and
replaced at once.
en - 3

Package contents

The package contains:
1 Cutsaw
1 General purpose saw blade set
1 Kitbox
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your cutsaw DW307MK is a versatile tool designed
for professional sawing applications. It is fully
counter balanced to reduce vibration.
1 Variable speed switch
2 Adjustable saw shoe
3 Saw shoe release button
4 Saw blade
5 Saw blade holder

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 50144; therefore no
earth wire is required.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
E N G L I S H
16