Power Supply - AEG BHG 750W Bedienung Und Installation

Installation - for contractors
9.2
Note
» Drill the holes and insert rawl plugs.
1
6
1 Retainer screw
2 Wall sleeve
3 Lock screw
4 Angle shim (BHG 750-1000W) | Washer (BHG 750
C)
5 Retainer
6 Cap
» BHG 750-1000 W: Use screws to secure the wall
sleeves and the shims.
» BHG 750 C: Use screws to secure the wall sleeves
and the washers.
» Secure the retainers to the rungs. Do not yet tighten
the retainers.
» Fit the wall mounting bracket. For this, observe the
slot position. The slot must point respectively up or
down.
14
2 3
5 5 5 5 5 5 5 5 5 5 4
» Assemble the appliance and wall mounting bracket.
» Insert and tighten the screws to secure the
appliance.
9.3
1
1 Bathrobe hook
2 Washer
3 Bathrobe hook backplate
» Fit the bathrobe hooks as shown.

10. Power supply

WARNING Electrocution
WARNING Electrocution
!
!
2
For this,
3
-