Preliminary Operations; Pellet Loading; Electrical Power Supply - Palazzetti EASY TOUCH Verwendung Und Betrieb

2

Preliminary operations

2.1 Pellet loading

The first operation to be performed before
switching on the product is to fill the fuel
tank (pellets).
The pellet must be poured into the tank
with a scoop.
Do not empty the bag directly into the
tank to avoid loading sawdust or other
foreign elements that could compromise
correct functioning of the stove and to
avoid dispersing the pellets outside the
tank itself.
Be sure to close the lid of the tank
well after loading the pellets. A safety
switch (IS) checks its correct closure
(Fig. 8.1).

2.2 Electrical power supply

Connect the stove to the mains, operate
the ignition switch on the back of the
stove, placing it on "I" (Fig. 8.2). If the
connection is correct, the stove emits a
series of intermittent acoustic signals and
the display lights up.
In the case of long periods of non-
use, it is advisable to position the
switch on the back of the machine in
the OFF position (O).
24
004778190 - 15/01/2020 - PN - Italy
IS
Fig. 8.1
Fig. 8.2