Use Of The Control Panel; Operating Parameters - Palazzetti EASY TOUCH Verwendung Und Betrieb

1.2 Use of the control panel

• Use the arrow keys
time to time.
• Focusing on a specific function, it is possible to scroll through any sub-menus with
the keys
again using the keys
• In general, all flashing values can be changed using the keys
• The "cancel" key
results in the display on the display of a possible alarm or error code.

1.3 Operating parameters

Functioning of the stove is determined by the Power and Temperature parameters set by the
user.
1.3.1 Changing the power
The power defines the quantity of heat produced by the stove and therefore also directly
affects consumption.
To change the power, use the keys
a) Scroll through the submenu with the keys
b) select sub-menu "1" and confirm with the key
c) the power value will flash; change the value with the keys
d) press the key
1.3.2 Temperature change
Depending on the installation configuration of the boiler it is possible to intervene on different
temperature values:
a) Move with the keys
b) the current value will flash; modify it with the keys
c) press the key
Water temperature (only in the installation configurations 1): varying this value the boiler's
desired hot water delivery temperature is varied.
Room temperature (only in the installation configurations 2): modifying this value defines
the temperature to be reached in the room, read directly by a probe placed on the boiler.
Storage tank temperature (only in installation configurations 3 and 4): it identifies the
minimum temperature to be maintained inside the storage tank.
22
to move between the different menus that light up from
; to modify a parameter, simply use the key
. Pressing the key
is used to go back one level in the menus; its prolonged pressing
to confirm the set data.
to the temperature menu
to confirm the set data.
004778190 - 15/01/2020 - PN - Italy
again confirms the change.
on the power menu .
;
;
and press the key
;
and modify its values,
.
(1 minimum,...,5 maximum);
;;