Pulox PO-400 Bedienungsanleitung Seite 20

R●
Sensor Off
10. Function Specification
Information
The Pulse Oxygen Saturation ( SpO
Pulse Rate ( PR )
Pulse Intensity (bar-graph)
SpO Parameter Specification
2
Measuring range
Accuracy
Average value
Pulse Parameter Specification
Measuring range
Accuracy
Average pulse rate
Safety Type
Pulse Intensity
Range
Battery Requirement
Voltage 3.7 rechargeable lithium battery × 1
Battery working life
Charge and discharge no less than 500 times.
Power Adapter
Input Voltage
Output voltage
Output current
Oximeter Probe
Wavelength:660nm~905nm
Dimensions and Weight
Dimensions
Weight
11. Warranty and service
We provide 1 year warranty for material and manufacturing defects of the product.
The warranty does not apply:
- in case of damage caused by improper operation
Pause the sound
prompt
Menu/ Power button
Recyclable
Recording
The probe is
disconnected.
This item is compliant with Medical Device Directive 93/42/EEC of June 14,
1993, a directive of the European Economic Community.
WEEE (2002/96/EC)
Date of manufacture
)
2
Sensor Fault
Finger Out
Display Mode
2-digit digital display
3-digit digital display
bar-graph display
0%~100%, (the resolution is 1%).
70%~100%:±2% ,Below 70% unspecified.
Calculate the Average value in every 4 measure
value.
The deviation between average value and true
value does not exceed 1%.
30bpm~250bpm, (the resolution is 1bpm)
±2bpm or±2% (select larger)
Moving calculate the Average pulse rate every 4
'
cardio-beat s cycle.
The deviation between average value and true
value does not exceed 1%
Interior Battery, BF Type
Continuous bar-graph display, the higher display
indicates the stronger pulse.
100 to 240 VAC, 50/60 Hz
DC 5 V
1000mA
61(L) × 56(W) × 24 (H) mm
About 60g (with the lithium battery*1)
EN
Open the sound prompt
Close the PR sound
Open the PR sound
Probe failure
The finger is not
inserted.