Technical Specifications; Details Of Materials In Direct Contact With Dough - JAC DIV Bedienungsanleitung

4

TECHNICAL SPECIFICATIONS

4.1 Technical specifications
Height, lid and frame
open (mm)
Width (mm)
Depth (mm)
Packaging (mm)
Net weight (kg)
Net weight + packing (kg)
Motor power rating (kW)
Motor type
220 V (A)
380 V (A)
Dividing-moulding
production rate (pieces/h)
Production rate for in-
tank dividing
Dividing-moulding dough
piece min./max. weights
(g)
In-tank dividing dough
piece min./max. weights
(g)
Tank capacity (kg)
The minimum hydration rate required for optimum operation is 55% for in-tank dividing and 70%
for dividing-moulding.
4.2

Details of materials in direct contact with dough

Square tank: STAINLESS STEEL 304
Round tank: Cast iron FGL200
Square tank heads: GHA-coated aluminium
Round tank heads: Teflon-coated cast iron
Knives: STAINLESS STEEL 304
Lid: Aluminium AlSi10Mg
Standard grid: Teflon-coated stainless steel 430
Shaped grid: Teflon-coated stainless steel 430 + EN AW-6060
Coarse tamping plate: UHMWPE
English
DIV
1759
600
772
800 x 880 x 1250 800 x 880 x 1250
Round tank: 315 Round tank: 320
Square tank: 300 Square tank: 305
Round tank: 335 Round tank: 340
Square tank: 320 Square tank: 325
50 Hz: 1.5 50 Hz: 1.5
60 Hz: 1.8 60 Hz: 1.8
Three-phase Three-phase
50 Hz: 8
60 Hz: 11 60 Hz: 11
50 Hz: 4.5 50 Hz: 4.5
60 Hz: 6.5 60 Hz: 6.5
900
150/950
300/1900 for 300/1900 for
10/20 option 10/20 option
19
DIV-R DIVIFORM
1759 1604
600 832
772 732
800 x 880 x
1250
260
280
50 Hz: 1.5
60 Hz: 1.8
Three-phase
50 Hz: 8 50 Hz: 8
60 Hz: 11
50 Hz: 4.5
60 Hz: 6.5
400 to 3000
depending on
grid type
900
19 to 2500
depending on
grid type
150/950
19 5
8
DIVIFORM+ TRADIFORM
1759 1759
832 832
772
800 x 880 x 800 x 880 x
1250 1250
285 315
305 335
50 Hz: 1.5 50 Hz: 1.5
60 Hz: 1.8 60 Hz: 1.8
Three-phase Three-phase
50 Hz: 8 50 Hz: 8
60 Hz: 11 60 Hz: 11
50 Hz: 4.5 50 Hz: 4.5
60 Hz: 6.5 60 Hz: 6.5
400 to 3000 400 to 3000
depending on depending on
grid type grid type
900
19 to 2500 19 to 2500
depending on depending on
grid type grid type
150/950
300/1900 for
10/20 option
19 for in-tank
dividing
5
5 for dividing-
moulding