Transportation And Storage; Technical Data - Husqvarna 525LK Bedienungsanweisung

Transportation and storage

• Store and transport the product and fuel so that
there is no risk that any leakage or fumes comes in
contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/switches or boilers.
• When you store and transport fuel always use
approved containers intended for this purpose.
• When you store the product for long periods the fuel
tank must be emptied. Contact your local petrol
station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and in
a well ventilated area.

Technical data

Engine
Cylinder displacement, cm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, according to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, litre
Weight
Without fuel, cutting attachment and guard, kg
1
Noise emissions
1
Noise emissions in the environment measured as sound power (L
2000/14/EC. Reported sound power level for the machine has been measured with the original cutting attach-
ment that gives the highest level. The difference between guaranteed and measured sound power is that the
guaranteed sound power also includes dispersion in the measurement result and the variations between dif-
ferent machines of the same model according to Directive 2000/14/EC.
20
Transportation and storage
Technical data
3
• Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.
• The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.
• Secure the product during transport.
• In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
• Allow the product to cool before you put in i storage.
525LK
25.4
3000
9500
6500
1.5 / @ 8500
Yes
NGK BPMR8Y
0.65
Walbro WTEA-8C
0.51
4.7
) in conformity with EC directive
WA
1027 - 001 - 23.04.2019