Maintenance; Maintenance Schedule - Husqvarna 525LK Bedienungsanweisung

To cut the grass
1. Make sure that the trimmer line is parallel to the
ground when you cut the grass.
2. Do not push the trimmer head to the ground. This
can cause damage to the product.
3. Move the product from side to side when you cut
grass. Use full speed.

Maintenance schedule

WARNING:
and servicing given in this operator's

Maintenance

Clean the external surface.
Make sure that the throttle trigger lockout and the throttle trigger operates cor-
rectly.
Do a check of the stop switch to make sure that it operates correctly.
Make sure that the cutting attachment does not rotate at idle speed.
Clean the air filter. Replace the air filter if it is necessary.
Examine the cutting attachment guard for damages and cracks. Replace the
guard if it is hit or damaged.
Examine the trimmer head for damages and cracks. Replace the trimmer head if
it is damaged.
1027 - 001 - 23.04.2019
Maintenance
Only do the maintenance
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
2. Apply full throttle.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING:
cover each time you assemble new trimmer
line to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
manual. For maintenance or servicing that is
not given in this operator's manual, speak to
your servicing dealer.
Clean the trimmer head
Daily Weekly Monthly
X
X
X
X
X
X
X
15