Explanation Of The Symbols On The Equipment - Scheppach HL455 Original Bedienungsanleitung

Explanation of the symbols on the equipment

The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the
explanations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks
and cannot replace correct actions for preventing accidents.
max. max. not allowed!
m Attention!
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Please read the manual before start-up
Use hearing protection
Wear safety footwear
Use safety goggles
Wear work gloves
Do not remove or modify protection and safety devices.
Do not spill hydraulic oil on the floor
Dispose of waste oil correctly (waste oil collection point on site). Do not dump waste oil in
the ground or mix it with waste.
Caution! Switch off the engine before repair, maintenance and cleaning. Unplug the mains
plug.
High-voltage, danger to life!
Do not reach into the rift area!
Risk of injury! Risk of cutting and crushing!
Do not reach into the machine without any protection!
Caution! Moving parts!
Only the operator is allowed in the work area of the machine. Keep other people and ani-
mals (minimum distance 5 m) at a distance.
The protective guard may be loaded with max. 5 kilograms!
Observe the maximum length and diameter of the wood (see technical data).
Do not use logs with snags!
In this operating manual, we have used this sign to mark all sections that concern your safety.
GB | 17