geo-FENNEL FL 275HV-TRACKING Bedienungsanleitung Seite 34

EN
HORIZONTAL USE
Set up the instrument on an even surface or mount it onto a tripod.
VERTICAL USE
Set up the instrument vertically (on the side with the vertical 5/8" hole) or mount it onto a tripod with its
vertical 5/8" thread.
After powering on the unit a flashing laser diode indicates that the automatic self-levelling procedure is
working. The laser starts rotating when self-levelled. If not the laser was set up outside of its self-
levelling range. In this case set up the instrument on a more even surface.
34