Operation; Main Menu; Display Texts - OJ Electronics ETO2 Anleitung

Type ETO2
zOnE 1 hEaT Off
zOnE 2 hEaT Off
afTErrun 1 0.00
afTErrun 2 0.00
sTandBy Off

OPEraTIOn

ETO2 is equipped with an easily operated encoder button (turn and press) and a display which
describes the current situation. The display is backlit and is illuminated by pressing the encoder button
(OK). The illumination is automatically switched off after 30 seconds.
Press the encoder button and the main menu will be shown on the display.
Turn the button to scroll through the options. Not all the options are shown on the display at once, but
they can be accessed by turning the encoder button.
Press OK to select a highlighted option.

MaIn MEnu

zOnE 1 Off
zOnE 2 Off
sEnsOr 1 ##.#°C
sEnsOr 2 ##.#°C
MOIsT 1 nO
MOIsT 2 nO
OuT. TEMP ##.#°C
suPPly w. ##.#°C
rETurn w. ##.#°C
alarM nO
shOw InfO
sETuP
rEsTarT
ExIT

dIsPlay TExTs

zOnE 1 Off
zOnE 2 Off
sEnsOr 1 ##.#°C
sEnsOr 2 ##.#°C
Status and afterrun data for zones 1 and 2 are now shown on the display.
Heating zone 1 active (ON) or inactive (OFF)
Heating zone 2 active (ON) or inactive (OFF)
Sensor 1 (heated sensor) core temperature. Applies only when ETOG sensor is
connected.
NOTE: The temperature shown does not equal ambient temperature during
moisture detection!
Sensor 2 (heated sensor) core temperature. Applies only when ETOG sensor is
connected.
NOTE: The temperature shown does not equal ambient temperature during
moisture detection!
English / User Manual
45