Delivery Contents; Product Description; Performance Description; Device Description - Bosch Rexroth BT356 Bedienungsanleitung

3 609 929 B68/2008-11 | BT356
3

Delivery contents

The delivery contents include:
• 1 BT356 card rack
• 1 instruction manual for the BT356 card
rack
4

Product description

Performance description

The BT356 card rack holds all the modules in
the tightening system. A board at the back of
the BT356 connects all the inserted modules
and supplies them with the necessary
voltages.
A maximum of 16 BT356 card racks can be
connected to each other. NK350/NK350S
and NKLxxx network couplers are required for
this purpose. Further information can be
found in the instruction manual for the
NK350/NK350S network coupler
(3 609 929 B69).
The motor contactors integrated in the servo
amplifiers are operated centrally by switching
the emergency OFF via the VM350 power
supply module. Further information can be
found in the instruction manual for the
VM350 power supply module
(3 609 929 B32).
The BT356 card rack can be installed in
control cabinets or other suitable housings
that meet the required protection class (see
chapter "5 Assembly" on page 28).
Bosch Rexroth AG

Device description

1
1 2
Fig. 1: View of BT356
Explanation of Fig. 1:
1 Elongated holes for assembly
2 X1N1 interface: mains connection
3 Label area
4 Safety warning (imprinted)

Mains connection

Comprehensive information on the mains
connection can be found in chapter
"5 Assembly" on page 28.
Label area
A label area that can be used to identify the
unit is provided on the card rack (unit number
in circuit diagram). The individual slots for the
tightening channels are identified by a label
(SE1/2, LT1, etc.).
LT3 LT4
Fig. 2: Label area on BT356
27/124
NK
3 4
SE5/6 LT5