Installation; Locking Dome Camera - Eneo NXD-2012PTZ1080 B Schnellinstallationsanleitung

The dome camera is for use in surface or pendent mounting applications, and the moun-
ting member must be capable of supporting loads of up to 4.5 kg. (Pendent mounting
must use pendent mount accessory.)
The dome cameras mounting bracket should be attached to a structural object, such as
hard wood, wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure
water-proofing.
1. Make screw holes on the ceiling using the supplied mounting Template Sheet
(Figure A).

Installation

Installation
Plastic Anchors (4x)
Mounting Bracket (1x)
Mounting Screws (4x)
Safety Lanyard (1x)
Dome Bracket (1x)

Locking Dome Camera

EN
23