Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
Wall
EN
Mounting template
Step 1: Stick the mounting template to the wall, drill 4 expansion screw holes.
Wall
Expansion screw
Step 2: Hammer the 4 expansion screws into the drilled wall holes.
Wall
Bracket
Step 3: Align the 4 expansion screws with the holes of the bracket, install the gasket and
the spring washer, then lock the 4 nuts.
7
Werbung
Inhaltsverzeichnis
