Device Configuration - HIKVISION IntercomModule Benutzerhandbuch

5 Device Configuration

You need to activate device and configure corresponding parameters via iVMS-4200 before use.
5.1 Activate Device
You cannot use the door station until you activate it.
You can configure and operate the video intercom devices via iVMS-4200. Default
parameters of door station are as follows:
•
Default IP Address: 192.0.0.65.
•
Default Port No.: 8000.
•
Default User Name: admin.
Steps:
1. Run iVMS-4200, enter Device Management, check the Online Device area.
2. Select an inactivated device and click the Activate button.
3. Create a password, and confirm the password.
Video IntercomModule Door Station · User Manual
59