Flight Mode; Made For Iphone (Mfi); Replace Battery - Cochlear Baha 5 Bedienungsanleitung

Flight mode

See figure
When boarding a flight, wireless functionality
must be deactivated because radio signals may
not be transmitted during flights. To disable
wireless operation:
1. Turn off the sound processor by opening the
battery compartment.
2. Press the button and close the battery
compartment at the same time.
To deactivate flight mode, turn the sound
processor off and back on again. (by opening and
closing the battery compartment).

Made for iPhone (MFi)

Your sound processor is a Made for iPhone (MFi)
hearing device. This allows you to control your
sound processor and stream audio directly from
iPhone, iPad or iPod touch. For full compatibility
details and more information visit www.cochlear.
com.
1. To pair your sound processor turn on Bluetooth
on your iPhone, iPad or iPod touch.
2. Turn off your sound processor and go to
Settings > General > Accessibility on your
iPhone, iPad or iPod touch.
3. Turn on your sound processor and select
Hearing Aids in the Accessibility menu.
4. When displayed, tap on the sound processor
name under "Devices" and press Pair when
prompted.
Talk on the phone
For best results, use a Cochlear Wireless Phone
Clip or stream the conversation directly from your
iPhone. When using a normal handheld phone,
place the receiver near the microphone inlet of
your sound processor instead of near your ear.
Ensure the receiver does not touch the sound
processor as this may result in feedback.
6
8
See figure 7

Replace battery

When there is approximately one hour of battery
power remaining, you will hear an audio indicator
comprising of two sets of four short beeps. At
this time you may experience low amplification.
If the battery runs down completely, the sound
processor will beep and then stop working.
Use one of the included batteries (zinc-air, non-
rechargeable) as a replacement. The batteries
included in the sound processor kit reflect
Cochlear's latest recommendations. Contact your
hearing care professional for additional batteries.
Hold the sound processor with the back facing
1
upwards.
Gently open the battery compartment until it
2
is completely open. Remove the old battery.
Dispose of the battery according to local
regulations. Remove the sticker on the + side
of the new battery. Insert the new battery
with the + sign facing upwards in the battery
compartment.
Gently close the battery compartment until it
3
is completely closed.
Battery tips
• Battery life decreases as soon as the battery is
exposed to air (when the plastic strip has been
removed).
• Battery life depends on daily use, the volume
setting, the use of wireless audio streaming, the
sound environment, the program setting, and
battery strength.
• To maximise battery life, switch off the sound
processor when its not in use.
• If a battery leaks, replace it immediately.
See figure 7