Important Safety Information - Omron M7 Intelli IT Bedienungsanleitung

HEM-7322T-E_D_M.fm Page 1 Friday, July 27, 2018 12:08 PM

Important Safety Information

Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
(General Usage)
DO NOT adjust medication based on measurement results from this blood pressure monitor. Take medication
as prescribed by your physician. Only a physician is qualified to diagnose and treat High Blood Pressure.
Consult your physician before using the device for any of the following conditions: common arrhythmias such as
atrial or ventricular premature beats or atrial fibrillation, arterial sclerosis, poor perfusion, diabetes, age,
pregnancy, pre-eclampsia, renal diseases. Note that PATIENT motion, trembling, shivering may affect the
measurement reading.
Do not use the device on an injured arm or an arm under medical treatment.
Stop using the device and consult your physician if you experience skin irritation or other troubles.
Do not apply the arm cuff on the arm while being on an intravenous drip or blood transfusion.
Consult your physician before using the device on the arm with an arterio-venous (A-V) shunt.
Do not use the device with other medical electrical (ME) equipment simultaneously. This may result in incorrect
operation of the device and/or cause an inaccurate reading.
Do not use the device in the area the HF surgical equipment, MRI, or CT scanner exists, or in the oxygen rich
environment. This may result in incorrect operation of the device and/or cause an inaccurate reading.
The air tube or the AC adapter cable may cause accidental strangulation in infants.
Contains small parts that may cause a choking hazard if swallowed by infants.
(Data Transmission)
Do not use this product on aircraft or in hospitals and remove the battery and AC adapter from the unit. This
product emits radio frequencies (RF) in the 2.4 GHz band, use of this product in locations where RF is restricted
is not recommended.
(AC Adapter (optional) Usage)
Do not use the AC adapter if the device or the power cord is damaged. Turn off the power and unplug the power
cord immediately.
Plug the AC adapter into the appropriate voltage outlet. Do not use in a multi-outlet plug.
EN
1
18C0605