Using The Memory Function; To View The Measurement Values Stored In Memory - Omron M7 Intelli IT Bedienungsanleitung

HEM-7322T-E_D_M.fm Page 20 Friday, July 27, 2018 12:03 PM
3. Using the Device

3.4 Using the Memory Function

The monitor automatically stores the results up to 100 sets for each user (1 and 2).
It can also calculate an average value based on the last 3 measurement values
taken within 10 minutes.
Notes:
• If there are only 2 measurement values in the memory for that period, the average will be based on
these 2 values.
• If there is 1 measurement value in the memory for that period, this is displayed as the average.
• If the memory is full, the monitor will delete the oldest value.
• When the DATA/FULL symbol (
values are deleted. Refer to "To Transfer the Data" in section 3.3.
• When viewing the measurement value taken without setting the date and time, "-/ - -:--" is displayed
instead of the date and time.

To View the Measurement Values Stored in Memory

1.
Select your USER ID (1 or 2).
2.
Press the
The Memory number appears for a second before the
pulse rate is displayed. The newest set is numbered "1".
Note:
The cuff wrap guide result appears on the display with the
measurement values. The cuff wrap guide lamp will not light.
20
) appears on the display, transfer the data before the measurement
button.