Cleaning; Troubleshooting - Renkforce RSD-1802 Bedienungsanleitung

Maintenance

Cleaning

Clean the exterior of the device with a soft, dry cloth or brush only.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the casing.

Troubleshooting

The Renkforce RSD-1802 SD tuner you have purchased is equipped with state-of-the-art technology and is safe to
operate.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible errors here:
Always observe the safety information!
No replay, no display, and the lights are out:
• Car fuse defective. Look up the respective fuse in the operation manual of your car. Check the fuse.
• The fuse of the SD tuner is defective. Remove the SD tuner and check the fuse.
• The positive line/earth line is loose. Remove the SD tuner and check the connections of the cables.
Replay only through one speaker:
• The balance control is wrongly adjusted. Adjust the balance control as described.
• The speaker connection has come loose. Remove the SD tuner and/or speakers and check the connections.
Replay only through the front or rear speakers:
• The fader control is not adjusted correctly. Adjust the fader control.
• The speaker connection has come loose. Remove the SD tuner and/or speakers and check the connections.
59