Husqvarna 520iLX Bedienungsanweisung Seite 5

• Before using the product and
after any impact, check for
signs of wear or damage and
repair as necessary.
• Inspect the working area.
Remove all loose objects,
such as stones, broken glass,
nails, steel wire, string etc.
that could be thrown out or
become wrapped around the
cutter or cutter guard.
• Check the motor for dirt and
cracks. Clean off grass and
leaves from the engine using
a brush. Gloves should be
worn when necessary.
• Check that the trimmer head
is completely attached to the
trimmer.
• Check that the product is in
perfect working order. Check
that all nuts and screws are
tight.
• Check that the trimmer head
and trimmer guard are not
damaged or cracked. Replace
the trimmer head or trimmer
guard if the have been
exposed to impact or are
cracked. Always use the
recommended guard for the
cutting attachment you are
using. See chapter on
Technical data.
• The product operator must
ensure that no people or
animals come closer than 15
meters while working. When
756 - 007 -
several operators are working
in the same area the safety
distance should be at least 15
meters.
• Carry out an overall
inspection of the product
before use. See the
maintenance schedule.
• National or local regulations
may regulate the use. Comply
to given regulations.
Personal safety
• The cutting tool does not stop
immediately after the product
is turned off.
• The product is only designed
for trimming.
• Keep bystanders away.
• Stay alert, watch what you
are doing and use common
sense when operating a
power tool. Do not use a
power tool while you are tired
or under the influence of
drugs, alcohol or medication.
A moment of inattention while
operating power tools may
result in serious personal
injury.
• This appliance is not intended
for use by person (including
children) with reduced
physical, sensory or mental
capabilities, or lack of
experience and knowledge,
unless they have been given
5