Husqvarna 520iLX Bedienungsanweisung Seite 13

recommend, see
Accessories on page
25 .
Trimmer head
• Always use the correct trimmer head, cutting
attachments and always use the recommended
trimmer line. Refer to
the assembly in the end of the Manual.
• Make sure that the cutter on the trimmer guard is not
damaged.
• Make sure that the trimmer line is wound tightly and
equally around the drum to prevent unusual
vibrations from the product. Different cord lengths
can result in vibrations that are not necessary. Tap
the trimmer head to get correct length on the cord.
To increase the life of the cord it can be soaked in water
for 2 days or more before assembly. This will make the
cord more resistant.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
• In this section the product's
safety features, its purpose
and how checks and
maintenance should be
carried out to ensure that it
operates correctly. See
instructions under the
Product overview on
heading
page 2 to find where these
parts are located on your
product.
• The life span of the product
can be reduced and the risk
of accidents can increase if
product maintenance is not
carried out correctly and if
756 - 007 -
Accessories on page 25 and
service and/or repairs are not
carried out professionally. If
you need further information
please contact your nearest
servicing dealer.
• Never use a product with
defective safety components.
The product's safety
equipment must be inspected
and maintained as described
in this section. If your product
fails any of these checks,
contact your service agent to
get it repaired.
• All servicing and repair work
on the product requires
special training. This is
especially true of the product
's safety equipment. If your
product fails any of the
checks described below you
must contact your service
agent. When you buy any of
our products we guarantee
the availability of professional
repairs and service. If the
retailer who sells your product
is not a servicing dealer, ask
him for the address of your
nearest service agent.
To do a check of the keypad
1. Press and hold the start/stop button (A).
B C
A
13