Troubleshooting - OHAUS Ranger 7000 Serie Handbuch

EN-4
Main Application Screen
Stability
Gross
(NET for net indicator)
Preset Tare
Reference Field
MENU & SCREEN NAVIGATION
Press the Menu
Press the button below
To select the highlighted menu item, press
3.2 Using the Instrument
Weighing Application
Use this application to determine the weight of items in the selected unit of measure.
Weighing
1. Press the
is the default).
2. Press Tare or Zero if necessary to begin.
3. Place objects on the pan to display the weight. When stable, the * appears.
4. The resulting value is displayed in the main Weighing Line in the active unit of measure.
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.

4.2 Troubleshooting

For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the Ohaus office
nearest you.
Current Mode
button to open the menu list.
and
button until Weighing is displayed in the upper left portion of the home screen (this application
.
Capacity
to move down and up the list respectively.
. Press to move back to previous screen.
®
RANGER 7000 SCALES
Assistance Information
Main Weight Field
Capacity or Status Guides:
Vary by application
Function Icons related to
Smart buttons