Maintenance; Troubleshooting; Technical Data - OHAUS 3000 Serie Bedienungsanleitung

EN-4
3.2 Menu Structure

4. MAINTENANCE

4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.

4.2 Troubleshooting

For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.

5. TECHNICAL DATA

The technical data is valid under the following conditions:
Indoor use only
Operating temperature range: -10° C to 40° C
Relative humidity: Maximum relative humidity 80% for temperatures up to 31° C decreasing linearly to 50% relative humidity at
40° C.
Altitude: up to 2000m
Mains supply voltage fluctuations: up to ± 10% of the nominal voltage
Pollution degree: 2
Installation category: II
.
3000 SERIES INDICATORS