Maintenance; Troubleshooting; Technical Data - OHAUS Defender 3000 Serie Bedienungsanleitung

4. MAINTENANCE

4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.

4.2 Troubleshooting

For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.

5. TECHNICAL DATA

Specifications
Models DF1500BS
Capacity (kg)
1500
Operating
tempera-ture/
Humidity
Emin (kg) 0.5
Load Cell Model /
Material
Load Cell
Capacity Emax
(kg)
Load Cell Safe
Overload Limit
Load Cell Output
Impedance
Load Cell
Excitation
Voltage
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
.
DF1500BR DF1500BRL
1500 1500
–10° to 40° / 0% to 95% Relative Humidity, Non-condensing
0.5 0.5
4 x OIML C3, IP67 alloy steel, shear beam
1,000
DF1500BL DF1500BLX
DF3000BL DF3000BLX
1500 / 3000 1500 / 3000
0.5 / 1 0.5 / 1
1,000 / 1,500
150% of Emax
350 Ω ± 1 Ω
5V ~ 15V, DC/AC
EN-3
DF1500BX
DF3000BV
DF3000BX
1500 / 3000 3000
0.5 / 1 1
1,500