Sartorius YDK 01-0D Betriebsanleitung Seite 13

LA/LP Balances, Except Models LA/LP3200D and
LA/LP1200S with the YDS01LP Draft Shield
§ Place the components on the balance
in the following order:
– Long adapter
– Bar frame
$ The wedge-shaped opening at the top of the bar
frame should face the direction from which the
sample holder (pan hanger assembly/glass plummet)
will be placed on the balance
LA/LP3200D, LA/LP1200S Balances with the
YDS01LP Draft Shield
§ Place the components on the balance
in the following order:
– Long adapter
– Compensating ring
– Bar frame
$ The wedge-shaped opening at the top of the bar
frame should face the direction from which the
sample holder (pan hanger assembly/glass plummet)
will be placed on the balance
Beaker/Immersion Device
§ Use the metal plate to support the beaker.
Place it on the bar frame base and then set both
on the balance.
The choice of the beaker and the immersion
device depends on the sample to be determined
(see below).
13