Storage And Transport; Disposal And Recycling - EINHELL GE-LM 36/4in1 Li Originalbetriebsanleitung

Sharpening the saw chain
Working eff ectively with the cordless pole-moun-
ted pruner is only possible if the saw chain is in
good condition and sharp. This also reduces the
risk of kickback. The saw chain can be re-sharpe-
ned by any dealer. Do not attempt to sharpen the
saw chain yourself unless you have the necessa-
ry tools and the necessary experience.
8.5 Maintenance of the hedge trimmer
(Fig. 47)
The blades should be cleaned and lubricated at
regular intervals in order to ensure best perfor-
mance at all times. Remove deposits with a brush
and apply a thin fi lm of oil.
8.6 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Pole-mounted pruner
Spare cutter rail Art. No.: 45.001.17
Spare chain Art. No.: 45.001.87
Trimmer/scythe
Spare line spool Art. No.: 34.050.96
Spare cutting blade Art. No.: 34.050.82

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_GE_LM_36_4in1_Li_SPK9.indb 45
GB

10. Storage and transport

Remove the batteries. Store the tool and its ac-
cessories in a dark and dry place at above free-
zing temperature. The ideal storage temperature
is between 5 and 30 °C. Store the electric tool in
its original packaging.
The tool has an integrated wall holder (Fig. 48/
Item M) for hanging it up.
•
Always hold the tool with one hand on the
handle and the other hand on the steady grip.
Do not carry the tool by its motor housing.
•
Secure the tool against slipping if you trans-
port it in a vehicle.
•
As far as possible, use the original packaging
for transporting the tool.
•
Clean the cordless multifunction tool and car-
ry out its maintenance before you put it into
storage.
•
If you are not going to use the cordless pole-
mounted pruner for an extended period of
time, remove the chain oil from the tank.
Briefly immerse the saw chain and the cutter
rail into an oil bath and then wrap them in oil
paper.
•
During storage or transportation, use the sup-
plied safety guards for the cutting blade, cut-
ter rail/saw chain and hedge trimmer blade.
- 45 -
20.11.2020 08:35:36