Herunterladen Inhalt Inhalt Diese Seite drucken

Important Technical Information - uebe visomat comfort 20 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für visomat comfort 20:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

B
Ensure that the air hose is not kinked. A kinked air hose may
prevent the cuff from deflating, thus interrupting the blood
flow in the arm for too long.
Please wait a few minutes between successive measure-
ments, otherwise the blood flow in the arm is interrupted for
too long and injuries could occur.
The device contains small parts that could be swallowed by
children. The air hose poses a strangulation hazard. Do not
leave the device unattended with children.
Do not take a blood pressure measurement on the same
side as a mastectomy with simultaneous removal of the axilla
lymph nodes.
Discuss the measured values with your doctor. Do not assess
the measurement results yourself. Never change the dose
of medicines prescribed by your doctor.
Before carrying out your self-measurement, please pay atten-
tion to the chapter "Important usage information" on page 43.

2. Important technical information

The unit contains sensitive parts and must be protected from
extreme temperature fluctuations, humidity, shocks, dust
and direct sunlight.
Do not knock or drop the device.
The device is not waterproof. Never immerse it in water or
any other liquids. If liquid enters the device, this may result in
serious damage and may cause malfunctions.
Do not apply pressure to the display. Do not place the device
with the display facing downwards.
EN-38
Safety instructions
© Copyright Gebrauchs.info
Safety instructions
The unit must only be operated with the cuff and accessories
provided (see "Original spare parts and accessories" on page
60). Using different cuffs or accessories can lead to incorrect
measurement results. The warranty will be invalidated if the
unit is damaged by third-party accessories!
A consistently good power supply to the device is necessary
for fault-free blood pressure measurements.
- Only use long-life alkaline batteries (LR6).
- Always replace all batteries simultaneously during battery
replacement. Do not mix new and old batteries or batteries
of different types.
- You will require 4 x 1.5 V batteries. Rechargeable batteries
only have a voltage of 1.2 V and are therefore not suitable.
- When using the device with a mains adapter, please only
use the visomat
mains adapter, which has been specially
®
tested for medical devices.
Never simultaneously touch the device's live electrical parts
and the patient.
If the device is not to be operated for an extended period of
time, please remove the batteries. In principle, all batteries
can leak.
Do not remove batteries from the device or separate it from
the mains adapter when the device is switched on.
Using this device in the vicinity of mobile phones, microwaves
or other devices with strong electromagnetic fields can cause
malfunctions and inaccurate measurements. During use,
maintain a distance of at least 30 cm from such devices.
Never open or modify the device or the cuff (except for re-
placing the batteries). If the unit has been opened, it must
be subjected to a metrological inspection by an authorised
institution.
B
EN-39

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Visomat comfort 40

Inhaltsverzeichnis