List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside PASS 50 A1 Bedienungs- Und Sicherheitshinweise

List of pictograms used

Alternating current / voltage
Dust Protected + Splash-proof (IP54)
for LED Work Light
(except mains sockets)
Splash-proof (only mains sockets)
LED Work Light PASS 50 A1

Introduction

We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the product as
described and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.

Intended use

The product is intended to illuminate *indoor and
outdoor areas. The product can withstand extreme
physical conditions in the form of vibration (1.0 m
200–2000 Hz). This product is only intended for
private use, e.g. in work-shops or garages and is
not suitable for commercial use or for use in other
applications.
Not suitable for household room
illumination.

Parts description

work light
1
stand
2
plug
3
6 GB/IE/NI
*Plugs for indoor use only
(for HG06704-BS only)
Length of the connecting cable: 3 m
Product designed to withstand
severe mechanical handling
socket cover
4
switch
5
socket
6
interlock (for HG06704-BS only)
7

Technical data

Operating voltage:
Total power consumption: 40 W
Protection class:
Degree of protection:
Socket:
Dimension:
Weight:
Projected area:
GS certified (not for HG06704-FR /
/ s HG06704-BS).
2 3

Scope of delivery

Check immediately after unpacking that the parts
are complete and that the product is in proper
condition.
1 LED Workshop spotlight
1 Instructions for use
230 V∼ 50 Hz
I
IP54 (splash-proof);
IPX4 (for socket of
work light ONLY)
max. 2500 W for
socket.
approx. 200 x 116 x
200 mm
approx. 2000 g
approx. 200 x 200 mm