List Of Pictograms Used; Intended Use; Description Of Parts - Parkside PAAS A2 Bedienungs- Und Sicherheitshinweise

Direct current
Alternating current
Protection Class III
Protection Class II
(SMP) Switch mode power supply unit
Short-circuit-proof safety isolating transformer
RECHARGEABLE WORK LIGHT
˜ Introduction
We congratulate you on the purchase of your new
product . You have chosen a high quality product .
The instructions for use are part of the product . They
contain important information concerning safety,
use and disposal . Before using the product, please
familiarise yourself with all of the safety information
and instructions for use . Only use the product as
described and for the specified applications . If you
pass the product on to anyone else, please ensure that
you also pass on all the documentation with it .
˜ Intended use
The product is intended for use at indoor or outdoor
areas without electrical connection, e .g . workshop,
garages, or garden sheds, etc . It has two brightness
settings plus white flashing light and red flashing light .
Attention: The flashing light is not suitable as a
traffic warning light . The product can further also be
used as a charger for small electronic devices with
USB charging .

List of pictograms used

The product and rechargeable batteries
withstand extreme physical conditions of vibration
(1 .0 m
not intended for commercial use or for use in other
applications .
˜ Description of parts
1 LED Light
2 Magnet
3 ON/OFF switch
4 Adjustable foot / Hand grip
5 Charging indicator
6 Battery status button
7 Protective cap
8 Micro-USB input socket
9 USB output socket
10 Power adaptor
11 Car charger adaptor
12 USB cable
Polarity of output terminal
Product designed to withstand severe
mechanical handling
USB connection symbol
Read user manual before use
Minimum distance to illuminated material
/ S3 @ 200–2000 Hz) . The product is
2
This product is not suitable for household
room illumination .
GB/IE 15