Silvercrest SEM 1100 C3 Bedienungsanleitung Seite 62

–
Then turn the large o or small espresso sieve p slightly to ensure it
cannot fall out.
NOTE
Wait until the espresso sieve o p has cooled down before taking it out!
►
In order to remove the espresso sieves o p from the sieve holder i,
►
turn the inserted espresso sieve o p until the indentation on the espresso
sieve o p is located directly above the indentation on the sieve holder i.
You can now remove the espresso sieve o p.
3) Place the sieve holder i in the appliance by inserting the "INSERT" mark,
which is located next to the hot water shower r, into the appliance and then
turning it clockwise until the handle of the sieve holder i is facing the front
("LOCK" mark).
4) Place a cup under the sieve holder i.
5) Close the steam control 7 (turn it as far as it will go in the direction of the "▯"
symbol).
6) Switch the appliance on using the On/Off switch 1. The red operating
lamp z lights up. The "Espresso" control lamp t flashes green.
The appliance starts to heat up.
SEM 1100 C3 GB │ MT │ 59 ■