KERN SFB A Serie Betriebsanleitung Seite 105

Pr
PTYPE
Lab
Prt
LAnG
P3 CAL COUNT
DECI
Configuration
DUAL
data
CAL
GrA
P4 OTH
LOCK
ANM
kg
P5 Unt
g
Switch-over
weighing unit,
lb
see chap. 7.5
oz
tJ
HJ
P6 xcl
P7 rst
P8 uwb
CK nt
P9 Ckm
CK P5
CK of
Factory settings are marked by *.
SFB-BA-e-1630
7E1
7 bits, even parity
7o1 7 bits, odd parity
8n1* 8 bits, no parity
tPUP* Standard printer setting
LP50 Not documented
Lab x
For data output format, see chap.8.2, tab. 1
(Lab 0*)
Prt x (Factory settings LAb 2 / Prt 7)
(Prt 0*)
eng* Standard settings English
chn
Display internal resolution
Position of the decimal dot
Setting balance type, capacity (Max) and readability (d)
off Single-range balance
R1 inc Readability
R1 cap Capacity
on Dual range balance
R1 inc Readability 1st weighing range
R1 cap Capacity 1st weighing range
R2 inc Readability 2nd weighing range
R2 cap Capacity 2nd weighing range
noLin For adjustment, see chap. 6.5.2
Liner For linearization, see chap. 6.6.2
Not documented
on Keyboard lock enabled, see chap. 7.12
off* Keyboard lock disabled
on Animal weighing enabled, see chap. 7.11
off* Animal weighing disabled
on*
off
on
off*
on
off*
on
off*
on
off
on
off
Not documented
Use to reset balance settings to factory default.
Not documented
Not documented
45