Setting The Dmx Start Address - Cameo Q Spot 15 RGBW Bedienungsanleitung

OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTES
• When the spotlight is properly connected to the mains, "Software Update Please Wait" (only for internal purposes), "Welcome to Cameo", the model
name and software version appear successively on the display during the start-up process. After this operation, the spotlight is ready for use and
starts in the mode that was previously selected.
• If one of the DMX operating modes is activated and there is no DMX signal at the DMX input, the display starts to flash after a few seconds.
• After approximately 30 seconds of inactivity, the display will automatically show the currently active operating mode.
• Fast Access Feature: In order to simplify the menu guide, the device has an intelligent menu structure which allows menu and sub-menu items
that were last selected to be accessed directly. 1. Pressing MODE and ENTER simultaneously will take you directly to the sub-menu item that was
last edited and allows you to instantly change the corresponding value as desired (DMX start address and all operating modes). 2. Pressing MODE
will take you directly to the menu item that was last selected and edited; now press ENTER to instantly access the sub-menu item that was selected
and edited last (DMX start address and all operating modes).

SETTING THE DMX START ADDRESS

Press the MODE button repeatedly until "Menu DMX Address" or "Menu Mode" appears on the display. If necessary, using the UP and DOWN buttons,
select the "Menu DMX Address" menu item and confirm with ENTER. Using the UP and DOWN buttons, select the desired DMX start address and
confirm with ENTER. At the same time, the DMX mode is started and the last selected DMX mode is activated.
ENTER
UP/DOWN
SETTING THE OPERATING MODE (Mode)
Press the MODE button repeatedly until "Menu Mode" appears on the display. If necessary, using the UP and DOWN buttons, select the "Menu Mode"
menu item and confirm with ENTER. The required DMX mode can be selected as desired by using the UP and DOWN buttons and activated by press-
ing ENTER (see tables, observe the sub-menus) You will find comprehensive DMX tables in the DMX CONTROL section of this manual.
Operating modes
Mode DMX = DMX operating modes
Mode Sound = Music control mode
Mode Slave = Slave mode
Mode Auto = Automatic Control Mode
Mode Static = Setting a "scene" without
external controllers
Mode Color = Colour Macros
Macro
- ENTER
02CH = 2-channel mode
03CH1 = 3-channel 1 Mode
03CH2 = 3-channel 2 Mode
04CH = 4-channel mode
09CH = 9-channel mode
Sound = Spot responds to bass impulses, Microphone sensitivity can be set.
Slave = Connect the DMX IN of the slave unit to the DMX OUT of the master unit
(same model) and activate one of the standalone modes in the master unit.
Now the slave unit follows the master unit.
Fade = Colour blending with speed setting (Speed).
Program = Combination of Fade and Jump mode with speed setting (Speed).
Jump = Rapid succession colour blending with speed setting (Speed).
Static = Master Dimmer, Dimmer Fine, Strobe (strobe function as channel 3 in
9-channel mode) and the individual colours can be set individually.
= 15 different colour macros are available as presets.
15