Technical Data; Environmental Concerns - IKEA TINAD Handbuch

ENGLISH

Technical data

Product dimensions (mm)
Height
Width
Depth
Net Volume (l)
Refrigerator
Freezer
Defrost system
Refrigerator
Freezer
Star Rating
Rising Time (h)
Freezing capacity
(kg/24 h)
Energy consumption (kwh/24h)
Noise level (dba)
Energy class

Environmental concerns

WARNING!: Ensure that the appliance
is switched off and disconnected from
the power supply before performing any
maintenance operation - risk of electrical
shock. Never use steam cleaning equipment
Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets.
Do not use paper towels, scouring pads, or other harsh cleaning
tools.
Disposal of packaging materials
The packaging material is 100% recyclable and is marked with the
recycle symbol.
The various parts of the packaging must therefore be disposed
of responsibility and in full compliance with local authority
regulations governing waste disposal.
Scrapping of household appliances
This appliance is manufactured with recyclable or reusable
materials. Doors and lids of the refrigeration appliance should
be removed before disposal in the landfill, to avoid children or
animals getting trapped inside. Dispose of it in accordance with
local waste disposal regulations. For further information on
the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for
household waste or the store where you purchased the appliance.
This appliance is marked in compliance with European Directive
2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). By
ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.
The symbol on the product or on the accompanying
documentation indicates that it should not be treated as domestic
waste but must be taken to an appropriate collection center for
the recycling of electrical and electronic equipment.
TINAD
1850
540
545
210
79
Automatic
Manual
4
9
The technical specifications are given on the rating plate inside
the appliance and on the energy label.
4
The model information can be retrieved using the QR-Code
reported in the energy label. The label also includes the model
0,773
identifier that can be used to consult the portal of the registry at
https://eprel.ec.europa.eu
35
F
Energy saving tips
To guarantee adequate ventilation follow installation instructions.
Insufficient ventilation on back of the product increases energy
consumption and decreases cooling efficiency.
Frequent door opening might cause an increase in Energy
consumption.
The internal temperature of the appliance and the Energy
Consumption may be affected also by the ambient temperature,
as well as location of the appliance. Temperature setting should
take into consideration these factors.
Reduce to a minimum door opening.
When thawing frozen food, place them in the refrigerator.
The low temperature of the frozen products cools the food in the
refrigerator. Allow warm food and drinks to cool down before
placing in the appliance.
Positioning of the drawers, baskets and shelves in the refrigerator
has no impact on the efficient usage of energy. Food should be
placed on the shelves in such way to ensure proper air circulation
(food should not touch each other and distance between food and
rear wall should be kept).
You can increase storage capacity of frozen food by removing
baskets and, if present, Stop Frost shelve, maintaining an
equivalent energy consumption.
Do not worry of the noise coming from the compressor.
Declaration of conformity
• This appliance has been designed for preserving food and
is manufactured in compliance with Regulation (CE) No.
1935/2004.
• This appliance has been designed, manufactured and
marketed in compliance with:
- safety objectives of the "Low Voltage" Directive 2014/35/EU
(which replaces 2006/95/CE and subsequent amendments);
- the protection requirements of Directive "EMC" 2014/30/EU.
XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXX XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX
XXXXX XXXXX XXXXX XXXXX XXXXX
XXXXX XXXXX XXXXX XXXXX XXXXX
XXXXX XXXXX XXXXX XXXXX XXXXX
12