Use - Miele Blizzard CX1 Gebrauchsanweisung

en
This hard floorbrush is especially suit-
able for vacuuming floors with deep
gaps and crevices, e.g. old wooden
flooring.
Using the accessories supplied
(dia. 10)
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, covers
etc.
 Dusting brush/Dusting brush
with natural bristles, supplied
loose
(depending on model)
(only available in selected coun-
tries)
For cleaning skirting boards, or-
nate and carved objects. The head
can be swivelled to adjust the
angle.
The crevice nozzle and the upholstery
nozzle are located in holders at the rear
of the vacuum cleaner.
Certain models are supplied as stand-
ard with a turbobrush which is not illus-
trated. The turbobrush is supplied with
its own set of operating instructions.
Dusting brush integrated in the
Eco Comfort handle (dia. 11)
Some models are equipped with an Eco
Comfort handle.
The dusting brush is suitable for vacu-
uming scratch-resistant surfaces, e.g.
keyboards, or vacuuming up crumbs.
42
 Press the release button on the dust-
ing brush and push the brush out un-
til it clearly engages in position.
 When you have finished dusting
press the release button and push the
brush back into its original position
until it clicks into place.
Adjustable floorhead (dia. 12)
The adjustable floorhead can also be
used for vacuuming the stairs.

For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.

Use

Unwinding the mains cable (dia. 13)
 Pull the mains cable out to the re-
quired length.
 Insert the plug into the socket.

If vacuuming for longer than
30 minutes, the cable must be pulled
out all the way. There is a risk of
overheating and damage.
Rewinding the cable (dia. 14)
 Switch off at the wall socket and
withdraw the plug.
 Step on the cable rewind foot switch.
The cable will then retract itself into the
vacuum cleaner.