Base Station Settings; Extending The Avena 248Te; Telephoning With Several Call Partners - Swissvoice Avena 248TE Bedienungsanleitung

Avena 248TE

Base station settings

Press Menu, select Settings and press OK.
•
Select BS Settings and press OK.
•
• Select a function from the list using the navigation keys
- Ringer - Select the ringer melody and volume for the base.
- Ring Priority - see above.
- Dial Mode - Tone - see above.
- Recall Mode - You may need to use the recall function if you are connected to a
PBX. Contact your PBX supplier for further information.
- First ring - see above.
- System PIN - see above.
- PBX Access Code - see above.
- Reset base

Extending the Avena 248TE

The delivered handset is already registered on to base station. In standby the internal
number of the handset is displayed.
You can register up to 5 handsets to your base station.
If you register your Avena 248TE handset with a "third party" base station or a "third
party" handset on your Avena 248TE base station (GAP), you may not be able to use
some functions or only to a limited extent.
Register new handsets
Accessory handsets must be registered to the base station. Use the handset menu for
registration:
Press Menu, select Settings press OK.
•
Select HS Settings and press OK.
•
Select Register and press OK.
•
• Select the desired base station. Press OK.
• Enter the system PIN (0000 on delivery). Press OK.
• Press and hold the paging key on the base station.
• If the registration is successful you will hear a confirmation signal.

Telephoning with several call partners

During a call you can make a second internal call (enquiry call), switch between call
partners (brokering) or simultaneously converse (3-way conference call) without the
need for two telephone lines.
84
(available on the handset)
†/π
and press OK.
Avena 248TE