Grundig GDS 2460 B Anleitung Seite 16

5 Installation Of Appliance
5.5 Installation of Air Baffle
While using with the carbon
filter, air baffle is provided with
your appliance with the aim of
re-releasing the air which is
cleaned with carbon filter from
the perforated located on the flue.
Assemble the air baffle as follows.
(Figure 10)
There is a tab in the middle of the
flue connection plate. Place the
middle point of this tab on the line
that is drawn perpendicular to the
wall. Align horizontally and mark
the holes where the connection
plate will be mounted via a pen
(Figure 10 / A, B).
Drill the marked points with Ø6mm
drill and insert 2 plastic dowels in
the drilled holes (Figure 10 / A, B).
Fix the flue connection plate to the
wall with 3.9x22 screws (Figure 10/
A, B).
For air baffle assembly, install
point C, D, E, F with Ø6mm drill
and Ø6mm plastic dowels (Figure
9).
Assemble cooker hood's body
(Page 16 / Figure 8).
(Figure 11)
1- Flap Pin Socket
2- Flap Pin
Attach the flue flaps to the plastic
flue adapter in the package content
as follows.
Insert the plastic pin (Figure 11 /
area no. 2) on the pin socket on the
motor exhaust (Figure 11 / area
no.1). Then bend the flap lightly to
insert the other pin on the flap and
insert the other pin to its socket
(Figure 11).
(Figure 12)
1- Air Baffle
2- Plastic Flue
Attach the plastic flue adapter,
which is included in the package, in
the direction of the air baffle. Lock
the flue adapter by turning it in the
direction of the arrow (Figure 12).
1
2
EN
ES
PT
DE
FR
DA
NO
SV
FI
RO
BG
PL
16