Strömungsmesser | FC50
2 Technische Daten
Funktionsbereich (maximal, siehe Kapitel 7):
Wasser/Öl
Luft
Zulässiger Temperaturbereich (Medium):
Schraub-/Eisteckvariante
Einschiebevariante
Zulässiger Temperaturbereich (Umgebung):
Schraub-/Eisteckvariante
Einschiebevariante
Druckfestigkeit Messkopf:
Ansprechzeit:
Wasser
Öl
Luft
Schutzart:
Messkopf
Nennspannung:
Analogausgang:
Schaltausgang:
Power FET, max. 500 mA, kurzschlussfest
- Kennzeichnung gemäß den Bestimmungen
der EG-Richtlinie 2004/108/EG (EMV-Richtlinie)
Störfestigkeit:
Störaussendung:
* Verzögerungswerte gemessen bei Schalt punkt-
einstellung auf 1 m/s (Luft: 25 Nm/s) und einer
Betriebsströmung von 2 m/s (Luft: 50 Nm/s) nach
plötzlichem Strömungsstillstand.
** siehe Kapitel 3
6
TECHNISCHE DATEN | TECHNICAL DATA
0 ... 4 m/s
0 ... 100 m/s
-25 ... +100 °C
-25 ... +100/130 °C**
-25 ... +65 °C
-25 ... +50/65 °C**
100 bar
ca. 2 s *
ca. 5 s *
ca. 8 s *
IP 67
DC 24 V (18 ... 32 V)
4...20 mA (12 bit)
EN 61000-6-2:2005
EN 61000-6-3:2007
2 Technical Data
Operating range (maximum, see chapter 7):
Water/oil
Air
Admissible temperature range (fluid):
Screw-in/Plug-in type
Push-in type
Admissible temperature range (ambience):
Screw-in/Plug-in type
Push-in type
Pressure resistance of the monitoring head:
Response delay:
Water
Oil
Air
Degree of protection:
Monitoring head
Supply voltage:
Analogue output:
Switching output:
Power FET, max. 500 mA, short circuit proof
- mark to demonstrate compliance with applicable
directive 2004/108/EC (EMC directive)
Immunity to interference:
Emitted interference:
* Delay with the switch point set to 1 m/s (air: 25
Nm/s) and the flow rate at 2 m/s (air: 50 Nm/s),
after a sudden complete flow stoppage.
** see chapter 3
0 ... 4 m/s (13.12 fps)
0 ... 100 m/s (328 fps)
-25 ... +100 °C
-25 ... +100/130 °C**
-25 ... +65 °C
-25 ... +50/65 °C**
100 bar/1450 psi
approx. 2 s *
approx. 5 s *
approx. 8 s *
IP 67
DC 24 V (18 ... 32 V)
4...20 mA (12 bit)
EN 61000-6-2:2005
EN 61000-6-3:2007