Cleaning Before Use; Connecting The Appliance - hanseatic HMGS5144FW Gebrauchsanleitung

Page EN-22 Start-up
14. Replace the door on the bottom
hinge (16).
15. Re-attach the top hinge (14) to the
top of the appliance using the three
screws (13).
(10)
16. Attach the blind covers (10) and (11) and
the blind plugs (12) on the door frame.
17. Check whether the door seal is securely
in place (see "Checking and cleaning the
door seals" on page EN-16).

Cleaning before use

To remove the odour that comes with all new
appliances, clean the appliance before using
it for the first time (see Section "Defrosting
and cleaning the freezer" on page EN-16).

Connecting the appliance

Risk of damage to property!
The coolant must be allowed to settle
before connecting.
(11)
After transport leave the appliance to
■
stand for 2 hours.
• Insert the mains plug into a properly in-
(12)
stalled socket (220–240 V~ /50 Hz).
NOTICE