Display Elements And Symbols - VOLTCRAFT Lux DL-230L Bedienungsanleitung

7. Display elements and symbols

The following symbols and information are shown on the display (5). Below you will find the list of symbols and their
meaning.
Icon
P
Lux
Fc
x10
ID
MAX
MIN
USB
USB PDF
PAUSE
MODE START
MODE STOP
TIME START
TIME STOP
Meaning
Status indicator: Measured values are within the limits defined during configuration.
No high/low alarm is set.
Alarm indicator: Measured values are exceeding the limits defined during configura-
tion.
Recording has been stopped.
Recording video.
Recording has been paused.
Device is ready to record: Device is configured, and recording has not started yet. It
will disappear when the data logger records.
Battery symbol: Full battery capacity
Battery symbol: Sufficient battery capacity
Battery symbol: Low battery capacity, replace the battery
SI unit of illuminance
Imperial unit of illuminance (foot candle)
Multiplier x10
Logger ID
Largest measured value
Smallest measured value
Connected to computer.
Connected to computer and generating PDF report.
Indicates that the pause function is enabled for the alarm limit.
Indicates that a start mode has been chosen. It will be shown before recording starts.
Indicates that a stop mode has been chosen. It will be shown before recording ends.
Indicates remaining time before start of recording.
Indicates remaining time until end of recording.
39