Orbea RISE Schnellstartanleitung Seite 7

12 | O R BEA
ENABLING ORBEA RS TOOLBOX
IN YOUR DEVICE
After downloading and unlocking Toolbox through Garmin
Express (PC or Mac) or Garmin Connect (smartphones)
and synchronizing your Garmin unit, activate the visuali-
zation of the data fields in your device.
Below is shown the method to see the Toolbox data field
on both Garmin Edge and watches compatible units.
1. Turn on your Rise and the unit you have installed Orbea
RS Toolbox on, they will pair automatically.
2. Access Activity Profiles from the Settings menu in your
device and choose the profile you want to use Rise with.
Garmin Edge units
Garmin watches.
QUI CKSTART GUI DE
3. Select "Data Fields" and the page of the activity profi-
le on which you want to see the data from your Rise.
Enable the data page and choose to see one data field
on the page.
Garmin Edge units
Garmin watches.
R I S E · R IS E 2 02 1
4. Scroll through the data to be seen on the screen. Select
Connect IQ and choose Orbea RS Toolbox.
If you had not connected your Rise before setting up
Toolbox on your device, the unit will show the messa-
ge "Searching..." after selecting the Orbea RS Toolbox
data field. When you turn on your bicycle and access
the page where you chose to see Toolbox, the data from
your Rise will be visible.
Garmin Edge units
Garmin watches.
O RB EA | 1 3
5. With Rise turned on, access the activity profile on which
you selected to see the data from Toolbox or start re-
cording an activity on this profile with your Garmin unit.
Navigate to the page you selected to see Toolbox on to
access the real-time data from your Rise.
Garmin Edge units
Garmin watches.
EN