Light Functions - Tylo Prime+ 1814 Benutzerhandbuch

Light Functions:

1. Press "Valance/Reading button" to turn ON or OFF
2. Note: "Outside Light" ON or OFF will not be functional on "S" series models.
Color Therapy Functions:
Press "Color Therapy Light" to activate a color light or sequence. The following details this sequence:
1 press – RED
st
2 press – RED-GREEN
nd
3 press – GREEN
rd
4 press – BLUE-GREEN
th
5 press – BLUE
th
6 press – BLUE-RED
th
7 press – BLUE-RED-GREEN
th
8 press – Activates full rotation of all 7 color therapy in sequence noted above
th
9 press – Turns Color Therapy Functions OFF
th
In addition at any point in the color sequence if you hold the control button down for 3 seconds it will
turn the color lights OFF
Note: The color of light is depicted in the waves around the bulb symbol.
Screen Saver Mode:
The Sauna Control screen has an automatic screen saver built in to it. If left untouched the display
will switch to a series of pictures that will change automatically. The remaining run time and room
temperature will still be displayed over the picture. When the timer runs out completely, the Touch Screen
will go completely dark after a preset amount of time.
Radio and MP3 Player Operations:
Note: Temperatures within the Sauna are high. Ensure that your electronic device will not be
damaged by these air temperatures. We do not warrant any such damage to electronic audio
devices.
4 Person Infrared Sauna Prime+ 1814
Press "Audio button"
Indoor reception (FM only) varies given your
surroundings and strength of signal. For MP3, you may
use a USB storage device, Micro SD card, or Audio
Cable. For Apple products, you will need to use a
3.5mm audio cable from your device to the control. Do
not use the USB port for Apple devices; it is not
possible to control your Apple device with the Sauna
Control Panel. Some versions of MP3 or other audio
files may not play in USB or Micro SD Slot.
Page 18
to switch to radio mode.
131007
Rev. 1