Tylo Prime+ 1814 Benutzerhandbuch Seite 13

Locate the electrical switch on the black Master Control Box and ensure the switch is on.
•
Bench tops can now be fit into place. Bench must tuck under the back heater guard and then
•
push all the way to the wall.
• The Bench Top should fit down flush from front to back. It may be necessary to use the
openings in the skirt to apply pressure forward or rearward on the skirt to allow the bench to
drop into place.
U Bench installation:
Optional use "U" bench: The room comes equipped with a U shaped bench that is
optional use. Leave bench out for the maximum seating capacity. Or bench can be
installed and positioned to be used as a lounging area.
• Use legs as pictured below. They are left and right as you will see by the way they contour
around the floor tile and the bench tops. Position top over the legs.
4 Person Infrared Sauna Prime+ 1814 Page 13 131007
Rev. 1