Control Panel Instructions; Temperature Functions - Tylo Prime+ 1814 Benutzerhandbuch

------------------------------------------------------------------------------------------------------------------------------------------------

Control Panel Instructions:

Main Power: Press POWER button in the upper middle portion of the screen. When lit red, control is ON.
When white, control is OFF.
Timer Functions: Press and hold
down to move timer.
:
Delay Timer #1

Temperature Functions:

1. Press to alternate between either
2. Press and hold
Pressing once will increase or decrease the desired setting in one-degree increments. You may also
slide the temperature bar with your finger.
Actual temperature readout shows temperature in the room.
3. Press to turn Bench/Leg/Floor Heat ON or OFF. Waves will show red in heating mode; white
when in OFF mode. If left on the waves will cycle on/off as the room reaches the set temperature.
4 Person Infrared Sauna Prime+ 1814
The Sauna Rooms is now ready to use!
Delay Run
Timer Timer
Audio
Valance/
On/Off
Reading
Lights
or
To preset sauna to come on later, use feature up to 24 hours for desired time delay.
C
or to set desired room temperature setting.
Power Actual
Button Temperature
Color Floor
Therapy Heat
On/Off On/Off
to set room run time. You may also slide your finger up and
F
or C or F will light to indicate the units desired
Page 17
Set
Temperature
Bench Bench
Skirt Heat
On/Off On/Off
131007
Rev. 1